Genotyping Arabidopsis T-DNA lines
Steven J Burgess
Disclaimer
DISCLAIMER – FOR INFORMATIONAL PURPOSES ONLY; USE AT YOUR OWN RISK
The protocol content here is for informational purposes only and does not constitute legal, medical, clinical, or safety advice, or otherwise; content added to protocols.io is not peer reviewed and may not have undergone a formal approval of any kind. Information presented in this protocol should not substitute for independent professional judgment, advice, diagnosis, or treatment. Any action you take or refrain from taking using or relying upon the information presented here is strictly at your own risk. You agree that neither the Company nor any of the authors, contributors, administrators, or anyone else associated with protocols.io, can be held responsible for your use of the information contained in or linked to this protocol or any of our Sites/Apps and Services.
Abstract
This protocol is used for genotyping Arabidopsis seedlings to test for the presence of a transfer DNA (T-DNA) insertion. By using two primer sets it is possible to determine whether a seedling is homozygous, heterozygous or azygous for an insertion in the predicted genomic location.
To identify lines with T-DNA insertions in a gene of interest, you need the Arabidopsis Genome Identifier (AGI) number corresponding to the genomic locus (e.g. RCS1A = AT1G67090), then visit the Salk Institute T-DNA Express site to find all the mapped insertions at your locus of interest.
Genotyping primers have been pre-designed for each T-DNA line, these can be retrieved from the Salk Institute T-DNA primer site, and ordered at any supplier of DNA oligonucleotides before starting the protocol.
In the US T-DNA lines can be purchased from the Arabidopsis Biological Resource Center (ABRC) and in the UK and EU from the European Arabidopsis Stock Center (NASC).
Recommended reading
Setting up the PCR reaction
Genotyping is performed with the Phire Direct PCR Mix, this includes the polymerase, nucleotides and salts necessary for amplification. We use the “dilution protocol” which involves taking a small leaf disk and homogenizing it in dilution buffer using a gel tip (see manufacturer’s instructions for more details.)
Steps
Prepare primer working solution
Re-suspend lyophilized primers in dH2O to a stock concentration of 100 mM. Note: primer sequences can be obtained from SALK T-DNA express if you have the T-DNA accession number (http://signal.salk.edu/tdnaprimers.2.html)
Create a 10 mM working solution of the primer by diluting 10 µL of the stock into 90 µL of water.
Preparing the PCR template
Using a 0.5 mm sampling device take a single leaf punch and add to 20 µL of dilution buffer.
5 µL of DNARelease Additive
Mash the sample with the end of a pipette tip
Incubate sample at room temperature for 5 mins
Incubate sample at 98 oC for 2 mins
Spin down sample for 1 min max speed in a mini centrifuge
Setting up the PCR reaction
Add the following components to a PCR tube. Set up one reaction with the diluted template from the putative T-DNA insertion line and one with WT arabidopsis as a negative control. The reaction will result in amplification if the T-DNA insert is present.
| A | B |
|---|---|
| Component | Amount |
| 2x Phire Master Mix | 10 µL |
| Diluted template | 1 µL |
| LBb1.3 primer [10 mM] | 1 µL |
| RP [10 mM] | 1 µL |
| dH2O | 7 µL |
Note: LBb1.3 (ATTTTGCCGATTTCGGAAC) is the recommended sequencing primer for SALK lines. If you have SAIL, Wisc_Lox or GABI-KAT lines you will need to use a different border primer
In a second PCR tube set up the following reaction. Set up one reaction for the putative T-DNA insertion line and one for WT arabidopsis as a positive control. This reaction tests for the absence of a TDNA insertion. If a T-DNA insertion is present there will be no amplification product as the distance between the L and R primers. The WT control should give a product, and heterozygous lines will also give a product as there is one WT allele.
| A | B |
|---|---|
| Component | Amount |
| 2x Phire Master Mix | 10 µL |
| Diluted template | 1 µL |
| LP [10 mM] | 1 µL |
| RP [10 mM] | 1 µL |
| dH2O | 7 µL |
Run the following PCR program
| A | B | C | D |
|---|---|---|---|
| Step | Temperature | Time | Cycles |
| Initial denaturation | 98 | 5 min | 1 |
| Denaturation | 98 | 5s | 40 |
| Annealing | * | 5s | |
| Extension | 72 | 20s | |
| Final Extension | 72 | 1 min | 1 |
*indicates annealing temperature to be adjusted to primer
Analyze the resulting products by gel electrophoresis
